For project item naming, Detect3D has an automatic incremental numbering system. This can be used in the Name text box when adding locations, zones, sub-zones, and all detector types.
Typing a number such as 1 or 01 or 001 at the END of the name will be recognized by Detect3D and incremented once the project item has been added.
Naming Recognized by Detect3D:
Device001
alpha-01
Detector1
Naming NOT recognized by Detect3D
001Device
01-alpha
1Detector
The auto increment will also recognize other numbers and adjust accordingly, e.g. Detector123 will become Detector124.