Defining an Inflow Group



  1. Click the Add Item tab and select Gas Leak or Emission from the dropdown menu

  2. From the Type: option select Group. The panel should update to appear as the figure below.



  3. Set the Name as "Inflow Group 01"

  4. In the Inflows: dropdown menu, press Ctrl and click on each of the leaks defined above for the group so that they are highlighted in blue as the below figure.


  5. Click off the panel to confirm the selection and select the Add Item button

  6. The properties panel will have a new inflow added comprised of the three inflows chosen in Step 4.